Starting clamp

PP-600 heavy-duty starting clamp, made of stainless steel materials

Stringing has never been as easy and efficient as it is now with the Eagnas PP-600 starting clamp.

  • Diamond-coated teeth
  • Handle distance: 3.25 inches
  • More grapping power
  • Secure any string
  • Used as starting clamp to hold any type or size of string at any tension to start tensioning process.
  • Also used as starting clamp to hold the string from outside the frame for 50-50 string pattern.
  • Also used for patching or tensioning short strings by using a discarded piece of string to extend it to the string gripper.
  • 1 piece per package
  1. The latest and upgraded PP-600 starting clamp:

Operating Procesure:

1. Used as starting clamp to hold the string from inside the frame.
2. Also used as starting clamp to hold the string from outside the frame for 50-50 string pattern.
3. Also used for patching or tensioning short strings by using a discarded piece of string to extend it to the string gripper.
4.
  • Place the short string into the jaws.
  • Thread a discarded piece of string through the outside hole on the left and pull the string through the corresponding hole at the right.
  • Place this string into the string gripper of the Eagnas stringing machine.
  1. The latest and upgraded PP-600 starting clamp:

    The handle distance of the old design is 2.5 inches. The handle distance of the latest and upgraded Eagnas PP-600 starting clamp is 3.25 inches.

    1985
    Eagnas PP-600    		 2004
    Eagnas PP-600
    • Not diamond-coated teeth
    • Handle distance: 2.5 inches
    • Less grapping power
    • Diamond-coated teeth
    • Handle distance: 3.25 inches
    • More grapping power
    • Secure any string