ST-102 Grommet Grinder

ST-102 Grommet Grinder

Very easy and efficient to remove the damaged grommets

  • Used to drill out the damaged grommets
  • 3mm grinder is for the badminton and single hole tennis racquets.
  • 4mm grinder is for the double hole tennis racquets
  • 1 3mm grinder and 1 4mm grinder per package

Operating Procedure:

1. Use Eagnas ST-102 Grommet Grinder to drill out the damaged grommets.

2. Insert the Eagnas ST-102 Grommet Grinder slowly into the hole with a slight forward pressure.

3. Rotate the Eagnas ST-102 Grommet Grinder back and forth with a twisting motion until the grommet disconnected from the strip.

4. Remove the damaged grommet.
5. Insert a new RG-001 replacement grommet.
6. Cut off the unused grommet about 0.1 inch (3mm) from the inside of the frame.